English
Micro Cultivator Simplex Cylinder Pump Of Applicable Fuel Injection Model Featured Image
  • Micro Cultivator Simplex Cylinder Pump Of Applicable Fuel Injection Model

Micro Cultivator Simplex Cylinder Pump Of Applicable Fuel Injection Model

Short Description:


  • Applicable Fuel Injection Model No.: 175
  • Length: 150MM
  • Width: 90MM
  • Weight: 1.02KG

    • Product Detail

    Product Tags

    Advantages

    Picture of SCP

    ● Its simple design makes it easier to use, repair, and maintain
    ● Its cost also tends to be lower due to a lower number of moving parts
    ● It has convenient flow regulation.

    Description

    Single cylinder plunger pump refer to as single cylinder pump, it has only one or the equivalent of a plunger pump. As the name suggests, it has only one working cylinder. Single cylinder plunger pump is a reciprocating pump, it belongs to the volume pump. The plunger is driven by the eccentric rotation of the pump shaft for reciprocating motion. Plus, its suction valve and discharge valve are unidirectional.

    The working principle of the single cylinder pump is as follows:
    When the plunger is pulled out, the pressure in ‘the working room’ is reduced, and the outlet valve will be closed. As it is below the inlet pressure, the inlet valve will open and the liquid will enter. However, after the plunger is pushed in, the pressure in ‘the working room’ increases and the inlet valve closes. Moreover, when it is above the outlet pressure, the outlet valve opens and the liquid is discharged.

    Single cylinder piston pump is divided into two representative structure forms which are axial piston pump and radial piston pump. As radial piston pump belongs to a new type of high efficiency pump with high technical content, radial piston pump will become an important part of the application with the continuous acceleration of localization.

    Picture of SCP

    Features

    product

    The Single cylinder pump hydraulic system flow is 63L/min, and double cylinder pump hydraulic system flow is 100L/min. In addition, single cylinder pump hydraulic tank volume is 160L, and double cylinder pump hydraulic tank volume is 260L.

    Here is more information about the cylinder pump parts:
    The crane with single cylinder pump is the basic arm, and the crane with double cylinder pump is the extended arm. There are 1.5 meters between general single cylinder pump basic arm and double cylinder pump extended arm.

  • Previous:
  • Next:

    • Products categories